Skip to content

Zapier IP addresses and static IP ranges

Most of its traffic has no fixed address. See when paid plans get static networks, plus the lists Make and n8n publish.

IP Allowlist Lookup

Find the IPs Zapier, Make and n8n call from

Your API sits behind a firewall and an automation cannot reach it? See which addresses each one uses, on which plan, ready to copy.

Try:

Runs in your browser. Nothing you type is sent or stored.

Zapier, Make and n8n IP addresses

From each app's own pages and files, checked Nov 15, 2026.

Zapier

Your inbound rule, for the app calling your servers

No fixed range; paid plans can use 2 static rangesZapier runs on AWS us-east-1 with changing addresses. On Professional, Team and Enterprise plans, traffic for supported apps (Webhooks by Zapier, API by Zapier, Salesforce, SQL databases and more) can leave from 2 static ranges.

These ranges hold 32 IPv4 addresses.

Why
An address only narrows who can reach you. A signature, a shared secret or mutual TLS proves the caller.
Static IP, us-east-1, 1 range
  • 44.214.195.64/28
Static IP, us-west-2, 1 range
  • 18.246.81.208/28
How to apply: Calls Zapier makes

Who acts: You, then your firewall team

  1. On a Free plan, do not add these ranges: your traffic does not use them.
  2. On a paid plan, ask Zapier support to turn on static IP for a private app, then allow both ranges.
  3. If your firewall cannot take a CIDR, add the 16 addresses of each range one by one (Copy as single addresses).

Better than an IP list: Zapier suggests allowing requests that carry the header User-Agent: Zapier rather than allowing the whole us-east-1 region.

Plan needed: Professional, Team or Enterprise plan

How changes are announced: Help article (opens in a new tab). Notice: Dated notice in a help article for the 2026 SQL change. Check the help article.

Source: help.zapier.com: 15406083674509 Use a static IP address to connect to Zapier (opens in a new tab), help.zapier.com: 8496216020877 Zapier IP addresses and allowlisting (opens in a new tab), help.zapier.com: 41225364367501 Update required new static IP addresses for SQL database integrations (opens in a new tab). Checked Nov 15, 2026.

Make

Your inbound rule, for the app calling your servers

3 addresses per zone; pick your zoneMake lists 3 outbound addresses for each zone. Zones are named by their address, such as eu1.make.com.

These ranges hold 18 IPv4 addresses.

Why
An address only narrows who can reach you. A signature, a shared secret or mutual TLS proves the caller.
Zone us2.make.com, 3 ranges
  • 44.209.150.16/32
  • 44.210.162.163/32
  • 35.170.163.230/32
Zone us1.make.com, 3 ranges
  • 54.209.79.175/32
  • 54.80.47.193/32
  • 54.161.178.114/32
Zone eu2.make.com, 3 ranges
  • 34.254.1.9/32
  • 52.31.156.93/32
  • 52.50.32.186/32
Zone eu1.make.com, 3 ranges
  • 54.75.157.176/32
  • 54.78.149.203/32
  • 52.18.144.195/32
Zone us1.make.celonis.com, 3 ranges
  • 44.196.246.20/32
  • 3.94.51.90/32
  • 52.4.48.212/32
Zone eu1.make.celonis.com, 3 ranges
  • 3.125.27.86/32
  • 3.68.125.41/32
  • 18.193.24.45/32
How to apply: Calls Make makes

Who acts: Your firewall or network team

  1. Allow the 3 addresses of the zone your organization runs in.
  2. If you are not sure which zone, allow all of them.
  3. Recheck the help page when a scenario starts to fail on a connection error.

How changes are announced: Help page (opens in a new tab). Notice: None stated. Check the help page.

Source: help.make.com: allow connections to and from make ip addresses (opens in a new tab). Checked Nov 15, 2026.

n8n

Your inbound rule, for the app calling your servers

Allow all 26 entries; they are sharedEvery outbound request from an n8n Cloud workflow (HTTP Request node, app nodes) comes from one of these. Many instances share each address.

These ranges hold 206 IPv4 addresses.

Why
An address only narrows who can reach you. A signature, a shared secret or mutual TLS proves the caller.
n8n Cloud outbound, 26 ranges
  • 4.165.103.112/28
  • 4.182.64.64/28
  • 4.184.78.240/28
  • 9.223.34.48/28
  • 20.52.126.0/28
  • 20.79.32.32/28
  • 20.218.174.0/28
  • 20.218.238.112/28
How to apply: Calls n8n Cloud makes

Who acts: Your firewall or network team

  1. Allow every entry: your instance can move to another address without notice.
  2. Keep authentication on the service: a shared address does not prove the request is yours.
  3. If requests start being blocked, check the page for new addresses.

Better than an IP list: Require a key or token on the endpoint n8n calls; the address alone is shared with other customers.

How changes are announced: Docs page (opens in a new tab). Notice: No advance notice. Check the docs page.

Source: docs.n8n.io: find your ip addresses (opens in a new tab). Checked Nov 15, 2026.

Photo of Utku Zihnioglu

By

ยท CEO & co-founder

Published Nov 16, 2026

New page: Zapier, Make and n8n IP addresses, ready to copy.

Zapier IP addresses are not fixed for most traffic: Zapier runs on AWS us-east-1 with changing addresses. On Professional, Team and Enterprise plans, supported apps such as Webhooks by Zapier and API by Zapier can route through two static /28 ranges, and for a private app you ask Zapier support to turn them on. Free plan traffic never uses them.

The lookup above shows those ranges, plus the lists Make and n8n publish, each from the app's own help page.

Which Zapier traffic uses the static ranges

Only traffic from a paid plan, through an app that supports the static option. Anything else still comes from Zapier's changing addresses, so a firewall that allows only the static ranges will block it. Zapier's old static address for SQL databases has stopped working; paste it into the lookup and it shows as retired, with the ranges that replace it.

Allow the user agent header, not a region

Zapier's own advice for traffic outside the static ranges is to allow requests that carry its User-Agent header rather than a whole cloud region. A region rule lets in every other customer of that cloud too. If your endpoint takes webhooks, a shared secret or a signature check proves the caller far better than either; our webhook signature checker helps you test one.

Make and n8n

Make publishes a short list of outbound addresses for each zone, so pick your zone in the lookup and allow only that one. It publishes none for traffic into Make, because those addresses change. n8n Cloud publishes one shared list for all its instances and gives no notice before it changes, so allow every address on it and recheck it often.

Zapier IP addresses: questions

Does Zapier have a static IP address?

Yes, on Professional, Team and Enterprise plans for supported apps: two /28 ranges, one in us-east-1 and one in us-west-2. Free plan traffic never uses them.

Should I allow the whole us-east-1 region for Zapier?

Zapier suggests allowing requests with the header User-Agent: Zapier instead. Most of its traffic leaves from changing addresses, so a rule for a fixed address would miss it.

Does 54.86.9.50 still work for Zapier?

No. It was Zapier's static address for SQL databases and stopped on March 15, 2026; the two static ranges replace it.

Which IP addresses does make.com call from?

Three outbound addresses per Make zone, such as eu1.make.com. Pick your zone in the lookup. Make says its inbound addresses change, so it publishes none for traffic into Make.

Do n8n's cloud IP addresses change?

They can change without advance notice, and many instances share each address. n8n recommends allowing every address on its list.

About this article

Photo of Utku Zihnioglu

Utku Zihnioglu

CEO & co-founder

Serial entrepreneur who built infrastructure companies handling billions of requests. Now leads engineering at Oneprofile, which finds the people worth talking to, researches each one, and follows up until they reply.

Drafted with AI from our product docs and code. Utku Zihnioglu answers for what it says.

Enrich your CRM without an automation in between

Oneprofile reads and writes your CRM through its API directly.

Free plan: 200 credits a month, 3 integrations, no card

Enrich your CRM without an automation in between

Oneprofile reads and writes your CRM through its API directly.

Free plan: 200 credits a month, 3 integrations, no card