Skip to content

Data enrichment

How to find company employees' email addresses in bulk

How to find company employees' email addresses in bulk: list them by team and seniority, look up each work email, and verify it before you send.

Photo of Utku Zihnioglu

By

ยท CEO & co-founder

Published Oct 30, 2026

ยท 14 min read

Free plan: 200 credits a month, 3 integrations, no card

Guide cover: How to find company employees' email addresses

The quickest answer to how to find company employees' email addresses is to turn the usual order around. List the people at the company first, by department and seniority. Then look up each person's work email from their name and the company's domain, and verify every address before the first send. Most advice starts at the lookup, with a name you typed in by hand, and never says where the names came from.

The names are the hard part. An email finder can only find an address for someone you already know exists, and a 120-person agency does not publish who runs its operations. Finding the address is one job inside B2B data enrichment, and this guide stays on that job: one invented company first, then a single person, then a whole account list.

To follow along on a real company, search a company's employees in a free workspace. Counting matches costs nothing.

How to find company employees' email addresses: list them first

Take one account and follow it through. Say you sell resource planning software to agencies, and your target is Cedar Creative (cedarcreative.example), a design agency of about 120 people. Nobody there needs your product in the abstract. The people who feel the problem are the ones who run the schedule.

Name the company and the teams you need

Write the teams down before you open any tool. Each one gets a seniority level and a few titles:

Team you need

Seniority

Titles to add

Operations

Head, Director, Manager

Head of Operations, Operations Manager

Project Management

Director, Manager, Senior

Director of Project Management, Senior Project Manager

Design

Director, Head

Design Director, Creative Director

Finance & Accounting

Director, Head

Finance Director

Human Resources

Head, Manager

Head of People, Resourcing Manager

At 120 people that is probably fifteen to twenty employees, not 120. That gap is the whole argument for listing first. "Every employee" is almost never the list you want, and an email to the office manager about resource planning is an email that teaches a spam filter about you.

If you are still deciding who signs at a company this size, finding decision-makers in a company covers the roles in a deal. When you only need the person at the top, finding a CEO's email address is the shorter route. This guide assumes you know the teams and need everyone in them.

Search the company's employees by department and seniority

Open Find people under Find leads and fill in two filter groups:

  • Companies: leave Start from on Employer identifiers and enter cedarcreative.example. A LinkedIn company page address is accepted as well.

  • Role: choose the Seniority levels and Departments from your team table, paste the titles into Job titles (one per line, or separated by commas), and switch on Currently employed so people who have left Cedar Creative drop out.

You do not need every spelling of a title. Sr. and Senior match each other, and so do & and "and". A role worded another way, such as Resource Manager beside Resourcing Manager, is a separate title, so add both.

Watch the match count while you work. It changes with every filter and costs nothing to read, which makes it the place to shape the search. If you would rather say it in words, type it into Describe the people you want above the filters and press Enter: the AI Assistant runs the search beside you while you keep adjusting filters by hand.

Preview a sample and trim the list

Preview a sample shows a few matches with their name, job title, and company. Unlike the count, the sample spends credits, so get the count close first. A Design Director belongs on the Cedar Creative list and a design intern does not: tick anyone outside your teams and choose Exclude people, and put recurring noise, such as Intern or Assistant, in Exclude job titles.

Keep the work email option ticked, then create the table

Click Continue, then Save to a new table. The enrich step lists what Oneprofile can fill in for each person, and Find work email is one of the four options there. Keep it ticked, set People to add, and read the cost on Create table before you click it. Its hover shows the most the run can cost.

How to find company employees' email addresses in bulk

Here is what happens for each of those twenty people once you click. Find work email takes the person's name and the company, then asks several data sources in turn until one confirms an address. The order is set by accuracy, not price: the sources that test most accurate for work email go first, then the ones answering best on recent runs, then the rest. Each person is charged the price of the source that answered, and a lookup that finds nothing costs nothing.

That structure matters more in bulk than for one person. Say one data source is strong on US software companies and thin on European agencies, and the next is the reverse. A single database would leave gaps that cluster in exactly the segments it never covered.

Why guessing the email format is not enough

The free alternative is to guess. Most companies pick one format for the part before the @, which the email address standard calls the local part, and hand it to every new hire. If you know one real address, you can build the rest. It works often enough to be tempting:

Format

Example at Cedar Creative

Where it breaks

first.last

dana.ortiz@cedarcreative.example

The second Dana Ortiz gets a number or a middle initial

first

dana@cedarcreative.example

Only one Dana can have it, so later hires get another format

flast

dortiz@cedarcreative.example

Double and hyphenated last names

firstlast

danaortiz@cedarcreative.example

A company that switched formats keeps the old one for early staff

first_last

dana_ortiz@cedarcreative.example

People who joined through an acquisition keep their old domain

A guess also tells you nothing about whether the mailbox accepts mail. On a catch-all domain, one that accepts mail sent to any address, a check cannot even tell a right guess from a wrong one. A lookup returns an address a data source has confirmed for that person, and a verifier then says whether it will land.

What the example run returns

Say the run comes back like this for six of the people it found:

Employee

Title

What came back

Dana Ortiz

Head of Operations

dana.ortiz@cedarcreative.example

Sam Whitfield

Director of Project Management

sam.whitfield@cedarcreative.example

Priya Nair

Design Director

priya@cedarcreative.example, an older format

Tom Becker

Senior Project Manager

tom.becker@cedarcreative.example

Lena Ruiz

Operations Manager

An address at her previous employer, marked Low confidence

Marco Hale

Project Manager

Nothing found, nothing charged

Priya's address is the one a pattern guess gets wrong, and a lookup gets right. Lena's is the job change case: Low confidence means the address sits at a different domain from the person's company, often a past employer, so check it before you send. Marco's empty result cost nothing. Check his name and the domain, then run the lookup again for him alone.

How to find someone's work email address by name and company

Sometimes you need one person, not a team. The manual route still works, and it is worth doing well:

  1. Confirm where they work now. A LinkedIn profile updated last month beats a press release from two years ago. With the profile link in hand, see how to get someone's email from a LinkedIn profile.

  2. Find the company's domain from its website, not its name. Several companies share some version of most names, while one domain points at one company. Our page on how to find a domain name from a company name shows what a lookup needs when the website is not obvious.

  3. Find one real address at that domain. A press contact, a support signature, or a blog author line shows the format. Build theirs from it, then verify it before you send.

In Oneprofile, put the name and company domain in a table, choose Add column, then Find or enrich, and select Find work email. Check that Full name and Company domain point at the right fields and run it. If the person's profile shows only the first letter of their last name, the lookup skips them and charges nothing, because any address would be a guess. Add the full last name and run it again.

One complaint while we are on company websites. A team page with names and titles is the most useful page a company can publish for anyone trying to reach it, and plenty of companies leave theirs two reorganizations out of date. Nobody has fixed this, and probably nobody will.

Verify each address before the first send

Finding an address and checking it are two separate steps. Choose Add column, then Find or enrich, select Verify email, and map the work email to its input. Bind it to the work email Find work email fills, and each new person runs both, one after the other. Every address gets a Deliverability verdict: valid, risky, catch-all, invalid, disposable, or unknown.

Send to the valid ones first. Hold risky and catch-all addresses for a small separate batch, verify unknown ones again later, and leave invalid and disposable addresses out. The guide to finding verified emails for a list covers what each verdict means and the second verifier for catch-alls.

The reason to be strict is your sending domain, not data hygiene. Google's email sender guidelines ask every sender to keep the spam rate reported in Postmaster Tools under 0.3%. In practice, twenty near-identical emails to one company in the same week is how a sender collects those reports, because the people who get them sit in the same office and compare notes. Space the sends and write each team its own reason. A list that came from somewhere else gets a pass through the free email list cleaning tool before it is verified, to drop duplicates, typos, and role addresses.

"Low reply rates drag your deliverability down, and poor targeting is what causes low reply rates."

Utku Zihnioglu, CEO of Oneprofile

The legal side varies by country, and we cannot tell you what applies to yours. In the EU a work email is personal data, and a cold email to one usually rests on legitimate interest under Article 6 of the GDPR. Write only to people whose job fits what you sell, and honor every opt-out. To see the consent rule in each country you write to, with its source, ask is cold email legal for those countries.

What finding employee emails costs per team

Find work email is up to 10 credits a person and Verify email up to 0.8, so one found and verified address is up to 10.8 credits. A lookup that finds nothing costs nothing, and most runs cost less than the figure shown before you start.

Employees you need

Find and verify, up to

Plan that fits

5

54 credits

Free, 200 credits a month

18

194.4 credits

Free, 200 credits a month

25

270 credits

Team, $20 a month for 1,000 credits

90

972 credits

Team, $20 a month for 1,000 credits

100

1,080 credits

Team, plus extra credits at $20 per 1,000

500

5,400 credits

Team, $100 a month for 5,000 credits, plus extra credits

Free also caps a table at 100 rows, 3 tables, and 1 seat, which is plenty for one account's teams. Team takes 10,000 rows a table with unlimited seats.

A shared inbox is a different lookup. Find company contact emails returns addresses like info@ and contact@ from a domain, for up to 7.4 credits a company. Those are useful for a partnership pitch, and almost useless for reaching the operations lead.

How to find company employees' email addresses across your account list

Run the same search across a table of companies

Cedar Creative was one account. Your list probably has dozens, and the teams you want are the same at each of them. When those accounts already sit in a Oneprofile table, from a CRM import or a Find companies search, switch Start from in the Companies group to A table of companies. Choose the table, and under Identifier column choose the column with each company's website or LinkedIn page. The Role filters you built for Cedar Creative stay as they are.

A few things change once the search follows a table:

  • It takes up to 5,000 companies. Each count, preview, and run reads the column again, so an account you add next month is searched too.

  • Anyone already in one of your tables is skipped, and the search keeps looking for people you do not have yet. Include people already in your tables turns that off.

  • On the table, Lead search schedule reruns the search, and each run holds its new matches until you approve them. That is how the next Head of Operations at an account reaches your list after the one you wrote to has moved on.

Then enrol the valid addresses in email and LinkedIn sequences.

Pick one account you have been meaning to write to and run its teams through. Find and verify the emails at your first account, and read every verdict before you write a word.

Do this in Oneprofile

Employees, work emails, and verdicts in one search

Find people lists a company's employees by department and seniority, Find work email adds each address, and Verify email returns a Deliverability verdict.

  • Oneprofile logo

6 steps to build it

Before you start

A free Oneprofile workspace, which renews 200 credits a month

The target company's website, or a table of the companies you sell to

The teams and seniority levels that feel the problem you solve

1

Name the company and the teams you need

Write down the company's website and the teams that feel the problem you solve, with a seniority level and two or three job titles for each. That list decides who gets an email, so settle it before you open any tool.

2

Search the company's employees by department and seniority

Open Find people, type the company's website into Employer identifiers under Companies, then set Seniority, Departments, and Job titles under Role. Switch on Currently employed. The match count updates as you go and costs nothing.

3

Preview a sample and trim the list

Click Preview a sample and read each job title next to the company. Tick anyone outside the teams you want and choose Exclude people, and put recurring noise such as Intern in Exclude job titles.

4

Keep the work email option ticked, then create the table

Click Continue, then Save to a new table. Keep Find work email ticked on the enrich step, set People to add, and read the cost before you click Create table. Each person is charged the price of the data source that answered, and an empty lookup costs nothing.

5

Verify each address before the first send

Add Verify email and map the work email to its input. Each address gets a Deliverability verdict: valid, risky, catch-all, invalid, disposable, or unknown. Send to the valid ones first and leave out invalid and disposable addresses.

6

Run the same search across a table of companies

For a whole account list, set Start from to A table of companies, pick the table and its Identifier column, and keep the same filters. Companies you add later are searched too, and a scheduled run waits for your approval before adding anyone.

Free plan: 200 credits a month, 3 integrations, no card

6 steps to build it

Before you start

A free Oneprofile workspace, which renews 200 credits a month

The target company's website, or a table of the companies you sell to

The teams and seniority levels that feel the problem you solve

1

Name the company and the teams you need

Write down the company's website and the teams that feel the problem you solve, with a seniority level and two or three job titles for each. That list decides who gets an email, so settle it before you open any tool.

2

Search the company's employees by department and seniority

Open Find people, type the company's website into Employer identifiers under Companies, then set Seniority, Departments, and Job titles under Role. Switch on Currently employed. The match count updates as you go and costs nothing.

3

Preview a sample and trim the list

Click Preview a sample and read each job title next to the company. Tick anyone outside the teams you want and choose Exclude people, and put recurring noise such as Intern in Exclude job titles.

4

Keep the work email option ticked, then create the table

Click Continue, then Save to a new table. Keep Find work email ticked on the enrich step, set People to add, and read the cost before you click Create table. Each person is charged the price of the data source that answered, and an empty lookup costs nothing.

5

Verify each address before the first send

Add Verify email and map the work email to its input. Each address gets a Deliverability verdict: valid, risky, catch-all, invalid, disposable, or unknown. Send to the valid ones first and leave out invalid and disposable addresses.

6

Run the same search across a table of companies

For a whole account list, set Start from to A table of companies, pick the table and its Identifier column, and keep the same filters. Companies you add later are searched too, and a scheduled run waits for your approval before adding anyone.

Free plan: 200 credits a month, 3 integrations, no card

How to find company employees' email addresses: FAQ

How do I find the email addresses of everyone at a company?

List the employees first, by department and seniority at the company's domain, then look up each person's work email from their name and that domain. Verify every address before you send, because a found address is not always a deliverable one.

Do all employees at a company use the same email format?

Usually, but not always. Most companies pick one format, such as first.last, and give it to new hires. Founders, early staff, two people with the same name and people who joined through an acquisition often break it, so look each address up instead of trusting the pattern.

Is it legal to email employees whose addresses you found?

Often yes, for relevant business outreach, but the rules differ by country. In the EU a work email is personal data, and a cold email usually rests on legitimate interest. Write only to people whose job fits what you sell, say who you are, and honor every opt-out.

Can I find employee email addresses for free?

Yes, for a small team. Oneprofile's Free plan renews 200 credits a month, with 3 tables and 100 rows per table, and a found and verified address is up to 10.8 credits, so it covers at least 18 people. A work email lookup that finds nothing costs nothing.

What is the difference between a work email and a company contact email?

A work email is one person's own mailbox, such as dana.ortiz@cedarcreative.example. A company contact email is a shared inbox like info@ or contact@. Find company contact emails returns those shared inboxes from a domain, for up to 7.4 credits a company.

Why did some employees come back without an email?

Either no data source had an address for them, or an input was missing and the lookup skipped them, and neither is charged. Check the company domain and the full last name, then run the lookup again on the empty ones.

About this article

Photo of Utku Zihnioglu

Utku Zihnioglu

CEO & co-founder

Serial entrepreneur who built infrastructure companies handling billions of requests. Now leads engineering at Oneprofile, which finds the people worth talking to, researches each one, and follows up until they reply.

Drafted with AI from our product docs and code. Utku Zihnioglu answers for what it says.

Find the emails of your next account's team

Search a company's employees by department and seniority, then find and verify each work email. Counting matches costs nothing.

Free plan: 200 credits a month, 3 integrations, no card

Find the emails of your next account's team

Search a company's employees by department and seniority, then find and verify each work email. Counting matches costs nothing.

Free plan: 200 credits a month, 3 integrations, no card